Free converter · Lossy re-encode
Convert AIFF to AAC
Short answer
Drop your AIFF file into the converter below and download the AAC file. It runs in your browser with FFmpeg, for files up to 100 MB; nothing is uploaded. The file is re-encoded to AAC audio at about 128 kbps. Re-encoding takes longer than a container swap and costs some quality; how much depends on the clip and on the quality setting, and at the converter's default setting the loss can be visible, so keep the original.
Maximum file size: 100 MB. The first conversion loads a ~30 MB converter engine, once per visit. Nothing is uploaded - conversion runs on your device.
Uncompressed AIFF to lossy AAC. · Lossy re-encode · Browser-side via FFmpeg WASM - nothing uploaded.
Key takeaways
- The 1.92 MB AIFF file became a 164 KB AAC file (-91.5%), about 127 kbps for the 10 second clip.
- The result holds: Audio: aac 48000 Hz 2 ch.
- In your browser the same conversion of a 3 second clip took 0.18 seconds on the single-thread engine; natively, the 10 second clip took 0.26 seconds.
- Next to it: AIFF to M4A (-91.5%), AIFF to MP3 (-91.6%), AIFF to WAV (0.0%).
Measured: AIFF to AAC
The converter's own ffmpeg arguments, run on a 10 second 1920 × 1080 excerpt of Big Buck Bunny (an animated film, not camera footage) saved in AIFF. The browser column is the same arguments on the single-thread WebAssembly core with a 3 second excerpt, in a headless run; your device will differ. Results describe this clip and these encoders.
| Check | Result |
|---|---|
| Mode | Audio re-encoded |
| Input | AIFF, 1.92 MB |
| Output | AAC, 164 KB (-91.5%) |
| Output streams | Audio: aac 48000 Hz 2 ch |
| Time, native, 10 s clip | 0.26 s |
| Time, browser engine, 3 s clip | 0.18 s |
A re-encode decodes and encodes every frame or sample, so the time grows with the length of the file.
AIFF vs AAC
| AIFF | AAC | |
|---|---|---|
| Full name | Audio Interchange File Format (Apple) | Advanced Audio Coding (raw stream) |
| What is inside | Uncompressed PCM audio | AAC audio without a container |
| Compression | Uncompressed | Lossy |
| Best for | Logic Pro, GarageBand and other Mac audio software | Players that take a bare AAC stream; M4A is the more common wrapper |
What you get
AAC audio at about 128 kbps. Uncompressed AIFF to lossy AAC.
Planning a bigger file
These are estimates scaled up from the 10 second clip. Real files differ with content, resolution and bitrate, so treat them as an order of magnitude, not a promise.
| Length of the video or recording | Input size (like ours) | AAC size | Time in your browser |
|---|---|---|---|
| 1 minute | 11.15 MB | 952 KB | 4 seconds |
| 10 minutes | 111.48 MB | 9.52 MB | 36 seconds |
| 1 hour | 668.89 MB | 57.09 MB | 3.6 minutes |
An AIFF file of this kind reaches the 100 MB limit of the converter after about 9.4 minutes; converting it would take roughly 34 seconds on the single-thread engine, and the AAC would be about 8.95 MB.
AIFF and AAC next to their neighbors
The same clip through other conversions with the same source or the same target.
| Conversion | How | Size change | Time (native) |
|---|---|---|---|
| AIFF to AAC | Re-encode | -91.5% | 0.26 s |
| AIFF to M4A | Re-encode | -91.5% | 0.28 s |
| AIFF to MP3 | Re-encode | -91.6% | 0.23 s |
| AIFF to WAV | Re-encode | 0.0% | 0.07 s |
| AVI to AAC | Re-encode | -97.9% | 0.30 s |
| FLAC to AAC | Re-encode | -89.9% | 0.29 s |
| FLV to AAC | Re-encode | -98.1% | 0.24 s |
Choosing AAC
AAC: Advanced Audio Coding (raw stream). Players that take a bare AAC stream; M4A is the more common wrapper. AIFF: Audio Interchange File Format (Apple). Logic Pro, GarageBand and other Mac audio software.
- Keep your original: a re-encode is a copy of a copy.
- If the destination states the format it accepts, use that and nothing else.
Questions people ask
Is this AIFF to AAC converter free and private?
Yes. It is free, needs no account and runs entirely in your browser, so the file never leaves your device.
Will converting AIFF to AAC reduce quality?
Some, because AAC is lossy and the file is re-encoded. How much depends on the clip and on the quality setting, and at the converter's default setting the loss can be visible, so keep the original. For uploads, the platform re-encodes again anyway.
Is there a file size limit?
Files up to 100 MB. The first conversion downloads a converter engine of about 30 MB once per visit; larger files are better handled by a desktop app such as HandBrake or FFmpeg.
How do I convert AIFF to AAC?
Choose the file in the converter above and download the AAC. It runs in your browser with no upload.
Will converting AIFF to AAC reduce quality?
A little, because AAC is lossy. Keep the original file.
Why did the file size change by -91.5%?
The target codec and settings decide the size. This 10 second clip came out at 164 KB, about 127 kbps.
How long does it take?
A 3 second clip took 0.18 seconds in the browser engine in our test; time grows with the length of the file.
How long will an AIFF file of 100 MB take?
At the speed we measured in the browser engine, about 34 seconds for a file like our clip. Your device and the content will change it.
Is my file uploaded?
No. The conversion runs in your browser.
Is there a size limit?
Files up to 100 MB. The first conversion downloads a converter engine of about 30 MB once per visit.
More converters
Sources and how we checked
- MDN: Media container formats
- MDN: Web audio codec guide
- MDN: Image file type and format guide
- FFmpeg documentation: stream copy
- FFmpeg Documentation: ffmpeg (stream selection, -map, -c copy) (read 2026-10-09)
- MDN: Web audio codec guide (read 2026-10-09)
- Blender Foundation: Big Buck Bunny (CC BY 3.0), the clip used for the measurements (read 2026-10-09)
Reviewed October 8, 2026. What the converter writes was measured with ffprobe on the same FFmpeg build your browser downloads; format descriptions follow MDN's media guides.