Free converter · Lossy re-encode
Convert FLAC to M4A
Short answer
Drop your FLAC file into the converter below and download the M4A file. It runs in your browser with FFmpeg, for files up to 100 MB; nothing is uploaded. The file is re-encoded to AAC audio in M4A, audio only. Re-encoding takes longer than a container swap and costs some quality; how much depends on the clip and on the quality setting, and at the converter's default setting the loss can be visible, so keep the original.
Maximum file size: 100 MB. The first conversion loads a ~30 MB converter engine, once per visit. Nothing is uploaded - conversion runs on your device.
Lossless source to lossy AAC inside M4A. · Lossy re-encode · Browser-side via FFmpeg WASM - nothing uploaded.
Key takeaways
- The 1.63 MB FLAC file became a 164 KB M4A file (-89.9%), about 131 kbps for the 10 second clip.
- The result holds: Audio: aac 48000 Hz 2 ch.
- In your browser the same conversion of a 3 second clip took 0.17 seconds on the single-thread engine; natively, the 10 second clip took 0.26 seconds.
- Next to it: FLAC to AAC (-89.9%), FLAC to OGG (-92.7%), FLAC to Opus (-92.8%).
Measured: FLAC to M4A
The converter's own ffmpeg arguments, run on a 10 second 1920 × 1080 excerpt of Big Buck Bunny (an animated film, not camera footage) saved in FLAC. The browser column is the same arguments on the single-thread WebAssembly core with a 3 second excerpt, in a headless run; your device will differ. Results describe this clip and these encoders.
| Check | Result |
|---|---|
| Mode | Audio re-encoded |
| Input | FLAC, 1.63 MB |
| Output | M4A, 164 KB (-89.9%) |
| Output streams | Audio: aac 48000 Hz 2 ch |
| Time, native, 10 s clip | 0.26 s |
| Time, browser engine, 3 s clip | 0.17 s |
A re-encode decodes and encodes every frame or sample, so the time grows with the length of the file.
FLAC vs M4A
| FLAC | M4A | |
|---|---|---|
| Full name | Free Lossless Audio Codec | MPEG-4 audio |
| What is inside | Losslessly compressed audio | AAC (or Apple Lossless) audio in an MP4 container |
| Compression | Lossless | Lossy or lossless |
| Best for | Archiving music at full quality in less space than WAV | Apple devices and voice memos |
What you get
AAC audio in M4A, audio only. Lossless source to lossy AAC inside M4A.
Planning a bigger file
These are estimates scaled up from the 10 second clip. Real files differ with content, resolution and bitrate, so treat them as an order of magnitude, not a promise.
| Length of the video or recording | Input size (like ours) | M4A size | Time in your browser |
|---|---|---|---|
| 1 minute | 9.76 MB | 981 KB | 3 seconds |
| 10 minutes | 97.59 MB | 9.81 MB | 34 seconds |
| 1 hour | 585.53 MB | 58.86 MB | 3.4 minutes |
A FLAC file of this kind reaches the 100 MB limit of the converter after about 11 minutes; converting it would take roughly 37 seconds on the single-thread engine, and the M4A would be about 10.54 MB.
FLAC and M4A next to their neighbors
The same clip through other conversions with the same source or the same target.
| Conversion | How | Size change | Time (native) |
|---|---|---|---|
| FLAC to M4A | Re-encode | -89.9% | 0.26 s |
| FLAC to AAC | Re-encode | -89.9% | 0.29 s |
| FLAC to OGG | Re-encode | -92.7% | 0.21 s |
| FLAC to Opus | Re-encode | -92.8% | 0.09 s |
| FLAC to WAV | Re-encode | +18.1% | 0.07 s |
| AAC to M4A | Copy | -0.3% | 0.05 s |
| AIFF to M4A | Re-encode | -91.5% | 0.28 s |
Choosing M4A
M4A: MPEG-4 audio. Apple devices and voice memos. FLAC: Free Lossless Audio Codec. Archiving music at full quality in less space than WAV.
- Keep your original: a re-encode is a copy of a copy.
- If the destination states the format it accepts, use that and nothing else.
Questions people ask
Is this FLAC to M4A converter free and private?
Yes. It is free, needs no account and runs entirely in your browser, so the file never leaves your device.
Will converting FLAC to M4A reduce quality?
Some, because M4A is lossy or lossless and the file is re-encoded. How much depends on the clip and on the quality setting, and at the converter's default setting the loss can be visible, so keep the original. For uploads, the platform re-encodes again anyway.
Is there a file size limit?
Files up to 100 MB. The first conversion downloads a converter engine of about 30 MB once per visit; larger files are better handled by a desktop app such as HandBrake or FFmpeg.
How do I convert FLAC to M4A?
Choose the file in the converter above and download the M4A. It runs in your browser with no upload.
Will converting FLAC to M4A reduce quality?
M4A adds no loss of its own. Keep the original file.
Why did the file size change by -89.9%?
The target codec and settings decide the size. This 10 second clip came out at 164 KB, about 131 kbps.
How long does it take?
A 3 second clip took 0.17 seconds in the browser engine in our test; time grows with the length of the file.
How long will a FLAC file of 100 MB take?
At the speed we measured in the browser engine, about 37 seconds for a file like our clip. Your device and the content will change it.
Is my file uploaded?
No. The conversion runs in your browser.
Is there a size limit?
Files up to 100 MB. The first conversion downloads a converter engine of about 30 MB once per visit.
More converters
Sources and how we checked
- MDN: Media container formats
- MDN: Web audio codec guide
- MDN: Image file type and format guide
- FFmpeg documentation: stream copy
- FFmpeg Documentation: ffmpeg (stream selection, -map, -c copy) (read 2026-10-09)
- MDN: Web audio codec guide (read 2026-10-09)
- Blender Foundation: Big Buck Bunny (CC BY 3.0), the clip used for the measurements (read 2026-10-09)
Reviewed October 8, 2026. What the converter writes was measured with ffprobe on the same FFmpeg build your browser downloads; format descriptions follow MDN's media guides.